Unfortunate Circumstances
Yes, the UK is now plummeted to minus figures, and that wouldn’t be too bad unless your heating broke. Yes, the boiler broke right. That’s it; you’re going to get a serious thrashing, typical. So it’s going to be down for about 3 or 4 days. So that means when the kids go to school and my wife goes to work, I’m left freezing my canoli off until they come home, and I can fire up the fires. So, uh yeah, we’ll carry on anyway, and uh today we’re going to be checking out this from Bangard.
Opening the Box
I think you’ll find that’s how you spin a box, B the ham they just sent over the night track. Now, this is a 1/10 buggy. So what we’re going to do is open it up, have a look at it, see what you get for the money, and then check it out in the garden, which is going to be even colder. Isn’t it right? Okay, let’s open it up and see what you get for your money. W, it’s so cold I haven’t even opened it up, so we’re going to look at it myself. The box is quite large, so I’m hoping it’s going to be reasonably decent. I’m not sure what the size of the box has to do with it, but uh, hopefully it’s actually a decent Basher, right?
Unexpected Obstacles
So, what we— how does this work exactly? So we just pull it out. I’m guessing, well, it looks like I’m going to need to get some Snips. That’s a bit different. Oh dear, the packaging is a mess. It’s all tangled up here. Let me just try and wiggle it free. There we go. Finally, we managed to unbox this thing. Phew! But wait, what is this? Is it a toy or a broken piece of junk? It’s barely recognizable as a 1/10th RTR RC. The body is all scratched up, and the wheels are wobbly. And, oh no, the remote control is missing! This is not looking good at all.
Disappointing Performance
Now, let’s move on to actually testing this abomination in the freezing garden. After some struggle, I managed to locate a replacement remote control. I insert the batteries and turn it on. As soon as I give it a little push, it jerks forward, then stops abruptly. It’s as if it has a mind of its own, constantly veering off track. It’s impossible to control and navigate through even the simplest obstacles. The supposed 1/10th scale is just a gimmick; it’s minuscule and weak. The power it lacks is evident in its feeble attempts to climb a tiny ramp. What an absolute disaster!
A Costly Mistake
In conclusion, this so-called 1/10th RTR RC from Bangard is nothing but a disappointment. From the shoddy packaging to the subpar build quality and abysmal performance, it fails to deliver on any front. For the price I paid, I expected something at least halfway decent
The Unboxing and First Impressions
Upon receiving the package, I noticed that it had been packed quite well. However, something seemed different this time. Without wasting any time, I decided to grab some snips to open it up and see what’s inside. With the anticipation building up, let’s dive right in.
The Transmitter
As I unveiled the contents, I came across the transmitter. Wow, it certainly had an abundance of buttons and dip switches. It seemed like there was enough here to keep me occupied for a while. However, I couldn’t help but notice that the material used for the transmitter felt a bit cheap and plastic-like. Nevertheless, I pressed on.
The Wheels and Manual
Moving on, I discovered that the wheels had been single-wrapped with what appeared to be tissue paper. It seemed like a rather odd choice of packaging, but I brushed it off. As I continued my exploration, I stumbled upon a tiny little manual. Clearly, they expected me to assemble this myself. Well, no second take for me, I guess.
The Shocks and Tires
Upon inspecting the shocks, I realized that they lacked oil. Naturally, I decided to take them off and add some oil myself. To my disappointment, I discovered that these shocks were actually made of solid plastic. There was no way to put oil in them. They were nothing more than friction shocks, and to be honest, they seemed quite terrible. Additionally, the tires were reasonably hard and had an excessive amount of offset. It made me wonder how long they would hold up before getting completely ripped off. Only time will tell.
The Overall Look
Despite its flaws, I couldn’t deny that the RC had a somewhat decent appearance. It wasn’t too bad visually, although the overall feel was undeniably cheesy. I must admit that the tires and rims looked somewhat impressive, but the excessive offset made me doubt their durability. Nevertheless, I decided to move forward and proceed with the next step.
The Back Spoiler
The first thing that catches the eye on this 1/10th RTR RC car is the small spoiler on the back. At least it feels quite strong and sturdy, which is a good start. However, I can’t help but wonder how long it will last under intense racing conditions. Will it hold up or break off easily? Only time will tell.
The Loose ESC
Upon closer inspection, I noticed that the ESC (Electronic Speed Controller) is actually loose and has come off its mounting. This is definitely not a good sign. I’ll have to stick it back in place before taking it for a test drive. It’s a bit disappointing to see such a basic flaw in the design of this RC car.
Plastic Chassis and Oversized Springs
Looking at the construction of the car, it’s clear that the chassis is made of plastic. While this might be a cost-effective choice, it raises concerns about durability and longevity. How well will it hold up against rough terrains and intense racing?
Additionally, I couldn’t help but notice that the springs on this RC car are unusually huge. It seems like a lot of spring for very little travel. This imbalance may result in the car bottoming out way before it even hits the ground. The excessive stress put on the vehicle could lead to more serious issues down the line.
Suspension Problem
It’s clear that not much thought was given to the suspension system of this RC car. The rear suspension seems manageable, but the front is a major cause for concern. It is miles off from being satisfactory and could potentially lead to the suspension getting damaged easily. This oversight is disappointing, to say the least.
Basic Drive Shaft and Metal Diffs
The drive shafts on this RC car are made of metal, which is a plus. However, they are pretty much as basic as they come. There is no fancy engineering or design aspect to them. It’s all about functionality and nothing more.
On the other hand, the presence of metal differentials is a positive aspect. This ensures the power is distributed efficiently to the wheels, which can enhance the performance of the RC car to some extent. It’s a silver lining amidst the disappointments.
Testing it Out
Now it’s time to see how this RC car actually performs. I charged up a battery, and with some skepticism, I decided to take it out for a spin. However, I must admit that I’m not overly sold on two specific aspects of this car.
Firstly, the wheels have a significant offset, which raises concerns about the stress it puts on the upright and the shocks. It makes me question the overall stability and durability of the car.
Secondly, the speed of the servo is far from impressive. It certainly won’t set the world on fire, so to speak. This lack of speed might hinder the overall performance and excitement one could expect from an RC car.
In conclusion, this 1/10th RTR RC car has its fair share of flaws and disappointments. From the loose ESC to the questionable suspension and underwhelming servo speed, it leaves a lot to be desired. While it may have some redeeming qualities like the sturdy back spoiler and metal diffs, it’s hard to overlook the overall lack of attention to detail and quality
Noisy and Dip Switches
The first thing that caught my attention about this 1/10th RTR RC is its unbearable noise. It’s hard to believe that a modern toy can produce such an irritating sound. But that’s not all; the front of this RC is adorned with eight mysterious dip switches. What are they for? Lights? Additional functionalities? Well, turns out, only one of them is useful for adjusting the steering. The rest, numbers 3, 4, 5, 6, 7, and 8, seem to be mere decorations. They do absolutely nothing. No lights, no extra features. Nothing.
Useless Buttons
Curiosity got the better of me, and I couldn’t resist pushing down on the four untouched buttons to see if they had any hidden purpose. To my astonishment, they turned out to be nothing but placeholders made of plastic. This revelation left me baffled and disappointed. How could the manufacturers overlook such a simple yet significant detail? It’s clear that this RC doesn’t deliver on even the most basic expectations.
Tight Differentials
Moving on to the motor, which supposedly boasts an impressive 12500 RPM 7.4, I couldn’t help but notice a glaring flaw. While I initially believed that this RC had locking differentials, my excitement was short-lived. Yes, it does have differentials, but they are excessively tight. To make matters worse, the front differential is even worse than the rear. If you dare to grab the front differential and give the truck a gentle acceleration, you’ll witness an unimpressive outcome. The ESC trips out because of the excessive resistance caused by the overly stiff differentials. It’s a disappointing flaw that can’t be ignored.
Poor Performance
In an attempt to salvage my hopes for this RC, I decided to take it out for a spin on a sunny summer day in the UK. Maybe, just maybe, its performance would surprise me. But alas, it was not meant to be. With all its flaws and limitations, it did nothing extraordinary. It simply raced, and that was it. There was no exhilaration, no thrill. It was a mediocre display of speed and nothing more.
In conclusion, this 1/10th RTR RC is a perfect example of an underwhelming and poorly designed toy. From its noisy operation to the useless dip switches and stiff differentials, it fails to impress. I had hoped for a remarkable experience, but all I encountered was disappointment. It is safe to say that this RC does not live up to the expectations one would have for a toy of its kind.
The Dreadfully Slow Performance
Shall we and we did 14 M hour yeah, and I think a lot of that is down to how tight the drive line is right. Lets see uh if you can take a little bit of punishment, so the first thing you can see is its dreadfully slow. Yes, at the skate park, anyone that was older than maybe six or seven is going to find this horrendously slow. But I guess, if it’s slow, it means it’s less likely to get broken, right? Yeah, I guess so.
Limits for Jumping
It is actually fun to sort of Zoom it around on the skate park and use these Banks, that’s all kind of okay. But if you’re thinking about jumping it, well that’s kind of about as good as it gets now, because you don’t have so much power. You can’t apply power to adjust the jump if you will or back off. It doesn’t seem to make any difference whatsoever. So it tends to just nose up all the time if you come off the power because you’re not going fast enough. It makes no difference either.
Inadequate Suspension
The big one and the one that will stand out, as you see, the whole of the running footage is just how horrendously bad the suspension is. It just bottoms out in style and then makes the car bounce because the chassis doesn’t travel all the way to the ground. It just locks out the suspension and then just flips the car over.
With these major drawbacks in its performance, it’s safe to say that this 1/10th RTR RC car might be one of the worst of 2023. The slow speed severely limits its usability, especially for older enthusiasts or anyone looking for a thrilling experience. Even basic jumps are lackluster and unsuccessful due to the lack of power and control during mid-air maneuvers.
Moreover, the suspension system is a disaster, as it constantly bottoms out and fails to provide any proper cushioning. This not only affects the car’s stability but also increases the risk of damage and accidents. The inability to adjust the suspension height further aggravates the problem, leaving the car prone to flipping over even during minor off-road excursions.
In conclusion, if you’re in the market for a 1/10th RTR RC car, it’s essential to thoroughly research and test various models before making a purchase. While this particular RC car may have its appeal to some, its subpar speed, limited jumping capabilities, and poor suspension make it an impractical choice for most enthusiasts.
Suspension Woes
When it comes to the worst 1/10th RTR RC of 2023, the suspension takes the cake for being a major disappointment. Right off the bat, it becomes evident that the suspension desperately needs an upgrade. The pogo stick-like suspension does not do justice to the overall performance of the car. It’s a shame that the manufacturers did not invest in proper oil dampers, as this would have greatly improved the driving experience.
A Surprising Surprise
However, amidst the gloom, a pleasant surprise came in the form of the car’s offset. Despite initial concerns, it proved to be robust throughout the testing. Not once did we encounter any issues with the upright or rims. I must admit, I was proven wrong in my assumptions, and it’s always refreshing to be surprised by a product’s capabilities.
Electronic Hiccups
Unfortunately, the same cannot be said for the electronics of this buggy. From the start, we noticed a trend of electronic issues plaguing our experience. The first issue came in the form of the motor getting disconnected. It seems that the battery may have become disconnected, which led to the momentary failure. Luckily, the motor came back to life once the issue was resolved, but it did serve as a warning sign for further issues to come.
Let Down by the Electronics
As we continued to put the car through its paces, the electronics continued to disappoint. Loose connections and flapping ESC only added to the frustrations. The steering also decided to give up on occasion, necessitating constant checks and reconnections. It’s evident that the electronics are not up to par with the demands of intensive bashing.
The Importance of Hot Glue
To ensure a more reliable performance, it is advisable to bring out the hot glue gun. Securing the servo connection with hot glue can prevent the hassle of frequent disconnections during bashing sessions. Ignoring this essential step could result in a disjointed and underwhelming experience with the car.
A Wheel Woes
Just when we thought our troubles were over, another setback occurred. The wheel, seemingly tightened with a lock nut, managed to come loose once again. It’s frustrating to encounter such issues, especially when they can easily be avoided with proper construction. This particular incident highlighted a flaw in the design and manufacturing process.
A Conclusion Without Conclusion
So there you have it, the worst 1/10th RTR RC of 2023. While it may boast some surprising features, such as its robust offset, the overall performance is marred by suspension issues and unreliable electronics. It’s a shame that a potentially great product falls short in crucial areas. Ultimately, buyers should approach this RC car with caution and be prepared to contend with its flaws.
The Issues with the RC Car
The 1/10th RTR RC Car of 2023 that I recently tested turned out to be a real disappointment. From the very beginning, it showcased several serious issues that made it far from enjoyable to use.
Unstable Wheels
One of the first problems I encountered was the instability of the wheels. In one instance, a wheel even completely fell off during a test run, which was quite surprising and frustrating. It’s not fair that such an essential component of the car couldn’t withstand even minimal stress.
Surprisingly Durable Chassis
Despite the wheel mishap, I must admit that the chassis itself proved to be surprisingly durable. Throughout all the bashing and rough handling, nothing on the chassis actually broke. This unexpected resilience made me think that with some modifications, this car could potentially withstand more abuse.
Potential Upgrades for Improvement
To enhance the performance of this RC car, I would recommend a few upgrades. Firstly, the suspension needs to be swapped out for a more reliable one, as the current version seems to underperform. Secondly, a more powerful ESC and a brushless setup would significantly improve the car’s overall speed and efficiency. Lastly, the wheels and tires should be replaced with softer ones, as the current rubber is too hard and the offset is just too much.
Costly Modifications
While these upgrades may greatly enhance the car’s performance, it is disheartening to realize that the total cost of all the necessary modifications would likely be quite high. In fact, it might be more practical and cost-effective to simply invest in a different RC car from the start.
Not Recommended in its Current Form
Considering the fundamental flaws and the competitive nature of this market, I cannot recommend this RC car to anyone in its current form. Although the chassis itself is commendable, the numerous issues it presents make it a far-from-ideal choice.
In conclusion, the 1/10th RTR RC Car of 2023 showcases some potential but falls short in execution. While the chassis provides promising durability, the stability of the wheels and the overall performance of the car are subpar. With extensive modifications, it may have some potential, but at that point, it may be more practical to look for alternative options in the market.
The Worst 1/10th RTR RC of 2023
Electronics and Speed
When it comes to the 1/10th RTR RC of 2023, it’s essential to acknowledge its flaws. The first issue lies with its electronics. Frankly, they are inadequate and do not provide the desired speed. To make matters worse, it requires a brushless upgrade. The need for a better Electronic Speed Controller (ESC) becomes evident too. Without these improvements, the RC is simply too slow and lacks the desired performance.
The Running Gear and Suspension
Another area of concern is the running gear of this RC. It appears to be too stiff, affecting its overall performance. The reason behind this stiffness is unclear. It could be due to the use of stiffer oil in the differentials or a problem with the gearing. Whatever the case may be, the motor struggles to keep up, resulting in a sluggish and slow experience. Additionally, the suspension fails to meet expectations, further diminishing the overall quality of the RC.
The Need for Additional Investment
Unfortunately, to salvage any enjoyment from this RC, one would have to spend more money. The need for additional investment to address the various issues is evident. Enhancements to the electronics, running gear, and suspension become necessary. It’s disheartening to think that a RC in this price range would require such extensive modifications to be functional.
No Comparison to Other Models
In the price range and category of this RC, there have been far superior options available. Although the competition may not be precise 1/10th scale models like this one, they have nonetheless proven to be more reliable and efficient. For instance, a 1/12th scale RC with brushes performs remarkably well, particularly when it comes to navigating skate parks. It is lighter and can handle abuse better, leaving this 1/10th RTR RC far behind in terms of performance.
Lack of Resolve
It is disappointing to see such obvious flaws in this RC. While the manufacturers could potentially rectify these issues, the question arises: at what extra cost? Will they pass on this expense to the customers? The uncertainty surrounding these concerns only makes it more difficult to recommend this RC. Ultimately, this review concludes that this model is undoubtedly one of the worst in its category, leaving little doubt that there are better alternatives available.
Conclusion
And there you have it, the unboxing and first impressions of what I believe to be the worst 1/10th RTR RC of 2023. From the cheap and plastic-like transmitter to the lack of oil in the shocks and the questionable durability of the tires, this RC definitely left a lot to be desired. While it may have had some redeeming qualities in terms of its appearance, it ultimately failed to impress. Stay tuned as I continue testing and evaluating this RC to see if it can redeem itself in terms of performance.
