MJX Hyper Go Body Share 14302 vs 14303 vs 14301
MJX Hyper Go 14302 – BMW Lancia
I have here the MJX Hyper Go 14302, the BMW Lancia. The details on this car are spectacular, with great quality and a unique design. The rear diffuser of this model has a stiffer angle upwards compared to other models.
MJX Hyper Go 14303 – Brand New Citrin
Now, looking at the MJX Hyper Go 14303, the brand new Citrin. This model is licensed and features a different rear diffuser design. When compared to the 14302 BMW Lancia, the rear diffuser on the Citrin is flatter.
Body Compatibility
The question at hand is whether the body of the Citrin would fit the BMW Lancia, and vice versa. Upon close examination, it is evident that the rear diffuser angles on the two models are distinct. When attempting to mount the Lancia body on the Citrin, there are alignment issues due to the differing designs.
While the top alignment may seem feasible, there is a gap when trying to secure the clips, indicating that the bodies of the 14302 and 14303 are not interchangeable due to the rear diffuser variations.
MJX 14301
Looking at the MJX 14301, the body is trimmed to fit another RC, which may cause some difficulty in fitting it on a different vehicle. The front bumper is larger and may need to be removed or trimmed for proper alignment.
MJX 14302
The MJX 14302 features a stiffer angle in the rear diffuser and a smaller front bumper, making it easier to fit the body without any forcing or alignment issues. The Citrin body fits nicely without any adjustments needed.
MJX 14303
The MJX 14303 has a unique design that may pose challenges in fitting different bodies. It is crucial to check the alignment of the pins and ensure that the body is not obstructed by the front bumper for optimal performance.
MJX Hyper Go Body Share 14302 vs 14303 vs 14301
When comparing the MJX Hyper Go Body Share 14302, 14303, and 14301, it is evident that there are some notable differences in terms of sizing and compatibility with the car chassis.
14302 Body Share
The 14302 body share is smaller in size but poses a problem with the rear alignment. While the pins align perfectly, there is a struggle to fit the body due to the rear diffuser touching the body excessively. Modifying the body by trimming the diffuser or removing it altogether may be necessary to make it work with the car. It requires significant force to press it down, and adaptation may be challenging.
14303 Body Share
In contrast, the 14303 body share offers a better fit and alignment with the car chassis. The pins easily align, and there is no need for excessive force to secure the body in place. The rear diffuser does not interfere with the body, providing a smooth and seamless finish at the back of the car.
14301 Body Share
Similarly, the 14301 body share provides a perfect fit without any modifications required. The pins align effortlessly, and the body sits snugly on the chassis without any interference from the rear diffuser. The alignment with the bumper is spot-on, offering a clean and refined look to the car.
In conclusion, while the MJX Hyper Go Body Share 14302 may require some adjustments to fit properly, the 14303 and 14301 models offer a seamless and hassle-free installation process. Choosing the right body share can make a significant difference in the overall look and performance of your RC car.
MJX Hyper Go Body Share
I don’t think it would make a whole lot of difference if this was a little bit shorter, just so you could use the same parts in the front. Yes, you probably have to have a new part, but in the back, I would probably have made a different decision and gone with the common part in this one again, the 14303.
Connection Ease
It connects pretty easily here in the front as well as in the back, so there you have it. This is how you connect one body to the other car and it does work, but you may need to change it or trim a little bit.
Compatibility Queries
Well, can I just buy this body and put it on my 14303, or can I buy this body 14302 and use it on my 14303? Hopefully, this nice beautiful car will get to the states soon. Right now you can only get it from AliExpress or other Chinese sites that ship overseas.
Futuristic Hopes
I hope that the MJX Hyper Go 14303 will eventually be on Amazon, so everybody can start buying like crazy, because this is a beautiful RC car and it works very nicely. It runs very well, it’s beautiful. So once more, thank you for watching, and I see you in the next one.
MJX Hyper Go Body Shell 14302
The MJX Hyper Go Body Shell 14302 is a sleek and aerodynamic option for your RC vehicle. It is designed with the same parts as the 14301, including the same diffuser and front design. The key difference with this model is the addition of a high post in the back, providing a unique look and increased body mount position. This allows for the use of larger bodies with ease.
MJX Hyper Go Body Shell 14303
The MJX Hyper Go Body Shell 14303 offers a similar design to the 14302, with its streamlined look and high post in the back. This model provides the same versatility in body mount position, allowing for the use of larger bodies on your RC vehicle. The 14303 is a stylish option for those looking to enhance the appearance of their vehicle.
MJX Hyper Go Body Shell 14301
The MJX Hyper Go Body Shell 14301 is comparable to the 14302 in terms of design and functionality. It shares the same parts, including the diffuser and front design. The main distinction with this model is the absence of a high post in the back. To accommodate larger bodies, users will need to purchase a separate plastic part that can be screwed in to create a taller body mount position.
Conclusion
Both the MJX Hyper Go 14302 and 14303 offer unique features and designs that cater to different preferences. The BMW Lancia and the brand new Citrin may share similarities in aesthetics, but when it comes to body compatibility, it is crucial to consider the specific design elements of each model to ensure a proper fit.