Restoration Process
I began the restoration process of the 1990 Kyosho Hurricane RC Boat with great enthusiasm. The first step was to carefully examine the boat and assess its overall condition. It was evident that this vintage beauty had seen better days, as it was in a seriously dilapidated state. However, this only fueled my determination to restore it to its former glory.
Challenges Faced
The restoration of this Kyosho Hurricane RC Boat presented certain challenges that required special attention. The boat’s exterior had suffered from extensive wear and tear, with scratches and faded paint marring its appearance. Additionally, the internal components were rusty and corroded, which necessitated thorough cleaning and replacement of certain parts.
Restoration Process
I meticulously dismantled the boat, taking care not to damage any delicate components. This allowed me to gain a complete understanding of its internal structure and identify the areas that required immediate attention. I then proceeded to clean the boat’s exterior, removing all traces of dirt and grime.
Paint Restoration
The key aspect of the restoration process was the repainting of the boat’s exterior. I chose a color scheme that closely resembled the original design, ensuring that every detail was meticulously replicated. The paint used was of the highest quality, guaranteeing a flawless finish.
Replacement of Components
The corroded and damaged components were carefully replaced with new ones, ensuring that the boat’s performance would be restored to its optimal level. The two Kyosho Lon Motors, known for their impressive torque, were an essential component of the restoration process. They provided the boat with the power and speed necessary to navigate the waters with ease.
The Final Outcome
After hours of meticulous work, the 1990 Kyosho Hurricane RC Boat was finally restored. The once dilapidated and forgotten vintage treasure now gleamed with vibrant colors and displayed its former prowess. It was a sight to behold, a testament to the joys of restoration and the resilience of these remarkable RC boats.
The Restoration Process
When I first acquired the 1990 Kyosho Hurricane RC Boat, it was in dire need of some restoration work. Over the course of three and a half years, I diligently worked on bringing this vintage gem back to life. Let’s delve into the details of what this boat needed and how I went about restoring it.
Missing Pieces and DIY Decals
Upon receiving the boat, I realized that it was missing a few crucial components. Fortunately, I was able to find some of the necessary parts locally in Deer. However, one glaring absence was the decals. Sadly, the boat did not come with any decals, so I had to get creative. I decided to make my own decals, meticulously painting the red accents to match the original design. The pink and greenish blue hues were also recreated using the appropriate colors from the box art. While this may not be a permanent solution, I still find the boat quite visually appealing.
Future Decal Upgrade
Although I am satisfied with the boat’s current appearance, I do plan on purchasing official decals in the future. Once I acquire them, I may strip the boat and replace the hand-painted details with the proper decals. This will give the boat a more authentic look while preserving its nostalgic aesthetic. Your opinion matters to me, so feel free to let me know if you think the boat looks pretty in its current form.
Excitement and Appreciation
Owning this Kyosho Hurricane RC Boat brings me immense joy. The restoration process was undoubtedly challenging, yet I am thrilled to finally have this remarkable piece in my possession. The amount of work it required was substantial, but the result was absolutely worth it. I couldn’t be more excited about the end product.
Final Touches
One of the missing elements that needed attention was the battery support on the inside of the boat. I have since rectified this issue and can now proudly showcase a fully functional and complete Kyosho Hurricane RC Boat. It’s astounding to see how a few missing pieces and worn-out components can be transformed into something so captivating.
In conclusion, the restoration journey of the 1990 Kyosho Hurricane RC Boat was a labor of love. It demanded time, effort, and resourcefulness, but the end result speaks for itself. This boat holds a special place in my collection, and I am grateful for the opportunity to revive its former glory.
Restoration Process
The 1990 Kyosho Hurricane RC Boat has a sturdy structure with supports inside to keep the hull intact. Without these supports, the top sections of the boat would start to collapse. Additionally, the wooden tabs or anchors that hold the structure together tend to rot over time. Therefore, I had to address these issues during the restoration process.
Enhanced Performance
To give this RC boat a little extra performance, I decided to install the Surpass Hobbies 550 12-turn high-performance motors, which are equipped with ball bearings. This modification turned the boat into a red monster, ready to take on the water. I also added a TRX waterproof servo and used a 2.4 GHz system and an 880 ESC dual motor ESC for smooth control.
A Pleasure Despite Challenges
Restoring the 1990 Kyosho Hurricane RC Boat was not an easy task, but it was definitely a pleasure. However, it required getting my hands dirty and investing some dedicated time. Unfortunately, I had only two weeks to complete the restoration as I had recently finished working on a Toia BBX project. Despite the time constraint, I managed to get it done, thanks to my passion for RC projects.
Projects Galore
The 1990 Kyosho Hurricane RC Boat is just one of the many projects I have been working on lately. Behind the scenes, there are a variety of projects taking shape, including the Halloween truck and the Teenage Mutant Ninja Turtles-themed RC vehicle. It’s an exciting time, juggling multiple projects and bringing them to life one by one. Stay tuned for more updates and adventures in the world of RC vehicles.
The 1990 Kyosho Hurricane RC Boat: A Resto and Run Review
Welcome to our review of the 1990 Kyosho Hurricane RC Boat! In this article, we will take a closer look at this vintage RC boat, its restoration process, and how it performed during a run. Let’s dive right in!
The Joy of Building
Building the Kyosho Hurricane was an absolute joy. As I carefully opened the box, I couldn’t help but admire the vintage design. Despite the tattered box, it added a sense of nostalgia to the whole experience. The boat came with some cool features and details, which reminded me of flipping through magazines and catalogs as a child in the 90s.
A Collector’s Dream
If you are into RC boats, whether they are vintage or not, the Kyosho Hurricane is a must-have for your collection. Its killer design is truly a sight to behold. Even if you’re not specifically a fan of vintage RC boats, this one is worth adding to your lineup. Trust me, you won’t be disappointed.
Restoration and Upcoming Projects
The Kyosho Hurricane isn’t the only RC boat we’ve worked on. In the past, we restored the Jet Stream, another remarkable vintage RC boat. We have exciting projects lined up for the future as well, including restoring the Cox RC electric Batman BMW and the Teenage Ninja Turtle lunchbox. The journey to bring these fantastic collector’s items back to life is a fulfilling one, and we can’t wait to share it with you.
In addition to boats, we’re also venturing into the world of cars. Soon, we will feature the MR4 rally, a thrilling RC car that promises endless fun. We’re particularly excited about Yokomo’s return and the introduction of their Vintage line. The love for RC toys never truly disappeared, and it’s great to see companies like Yokomo bringing back beloved classics such as the Dog Fighter.
The First of Many
As we continue to explore the world of RC vehicles, the F10-based ser heres car will mark the beginning of our RC series. This unique version of the F10 adds another layer of excitement to our collection. With each new addition, we aim to showcase the beauty of these machines and the enjoyment they bring to enthusiasts and collectors alike.
Stay tuned for future updates and reviews as we embark on this journey of restoring and running vintage RC boats and cars. The 1990 Kyosho Hurricane RC Boat has turned the spotlight onto a world long cherished but never forgotten.
Examination of the Kyosho Hurricane
The Kyosho Hurricane, a model from 1990, has aged significantly over the years. Although the hull appears to be in good condition without any cracks, it has turned a yellowish hue due to the passage of time. The decals, unfortunately, have deteriorated beyond recognition. The front section of the boat, in particular, has suffered some damage but nothing too severe. Let us now inspect the interior of the boat.
Upon closer inspection, it becomes apparent that the battery stay is missing. To rectify this, we will need to fashion a replacement using carbon fiber, a durable and lightweight material. The Kyosho Hurricane also boasts a noteworthy feature – the Kosa 360 Lamon motor. These motors have gained popularity among enthusiasts and are currently in high demand. The servos, however, appear to be outdated Challenger high-tech models, which will need to be replaced. We will dismantle the boat to check for any bearings that may need replacement.
Upon further examination, the boat’s stability is ascertained with the presence of stabilizers. In order to enhance its performance, a cooling jacket for the motors is on the agenda. Research will be conducted to find a suitable cooling jacket that fits perfectly into the boat.
Restoration Process
With the aim of restoring the Kyosho Hurricane to its former glory, several steps need to be taken. Firstly, the yellowed hull will require a thorough cleaning. This can be achieved by using a mild detergent and warm water, gently scrubbing away the discoloration. Care must be taken not to damage the decals any further.
Next, the damaged decals will need to be replaced. Finding accurate replicas or reproductions of the original decals may prove to be a challenge, but with some diligent searching, suitable replacements can be found. It is important to choose high-quality decals that adhere well and withstand the operating conditions of the boat.
The missing battery stay will be recreated using carbon fiber. The lightweight yet robust nature of carbon fiber makes it an ideal material for this purpose. Precise measurements will be taken to ensure a perfect fit, and the carbon fiber piece will be securely attached to the boat using adhesive or other suitable methods.
The outdated servos will be replaced with newer, more efficient models. It is essential to choose servos that are compatible with the boat’s requirements and offer optimal performance. Thorough research will be conducted to select the most suitable servos and integrate them seamlessly into the boat.
Lastly, the cooling jacket for the motors will be acquired and installed. This component plays a crucial role in maintaining the optimal temperature of the motors, preventing overheating and ensuring their longevity. The cooling jacket must be well-designed and efficiently dissipate heat, allowing the boat to perform at its best.
Test Run and Review
After the restoration process is completed, it is time to take the Kyosho Hurricane out for a test run. The boat’s performance and handling will be evaluated, taking into consideration the upgrades and improvements made during the restoration process.
The boat’s speed, stability, and maneuverability will be closely observed. Attention will be paid to any noticeable improvements resulting from the replacement servos, the addition of
Decal removal and repainting
In the next segment of this video, we will see how the decals of the 1990 Kyosho Hurricane RC Boat are being removed. The process involves heating up the decals with a hairdryer to make them easier to peel off. This is a necessary step in order to repaint and restore the boat to its former glory. The red decal might be painted over to save time and effort, while the pink decals will be assessed to see if they can be salvaged. If not, they will also need to be repainted. Overall, the restoration process is expected to go smoothly.
Decal removal tips
Removing decals from the boat requires some care and patience. It is recommended to use a hairdryer to heat up the decals, but caution must be exercised to avoid overheating the decals or the boat’s surface. Keeping the hairdryer at a moderate temperature is enough to loosen the decals, making them easier to remove. By following these tips, the process should be manageable and successful.
Repairing and sealing the exterior
To ensure the boat’s durability and resistance to water, two types of epoxies were used to fill in the significant break on the outside of the hull. This extra measure was taken to prevent any water from penetrating the repaired area. The choice of epoxies was made with careful consideration for the boat’s performance in the water. With the exterior repaired and sealed, the boat is now ready for its next adventure.
Restoration Process
To start the restoration process, I noticed that there were two cracked pieces on the 1990 Kyosho Hurricane RC Boat. To fix this, I decided to use epoxy to bond the pieces together and allow for some flexibility. This epoxy not only secured the pieces but also created a tight and firm bond. After a few days, I used a plastic bonder as a filler to smooth out the area and prepare it for sanding.
If you’re looking for a quick fix, using epoxy alone might suffice. However, since the boat will be in the water, I wanted to ensure that it not only looked good but also remained watertight. To achieve this, I applied a generous amount of Flex Glue, a rubbery substance, behind the repaired area. This extra layer of protection would prevent any water from seeping in, even if the boat experienced another crack or breakage in the future.
Painting and Finishing Touches
With the boat’s structure restored and waterproofed, it was time to give it a fresh look. After sanding the repaired area, I proceeded to apply a coat of paint. The choice of color is entirely up to your preference, but I opted for a vibrant shade that would make the boat stand out on the water.
The Run
I approach the maiden run of the restored Kyosho Hurricane RC Boat with caution. Starting off slowly, I wanted to get a feel for how the boat handled and ensure that everything was working smoothly. It’s essential to familiarize yourself with the boat’s controls and responsiveness before picking up speed.
As I gradually increased the throttle, the boat glided across the water effortlessly. The power and speed of the Kyosho Hurricane were impressive, providing an exhilarating experience. Despite the slightly murky water, the boat performed admirably, cutting through the waves and leaving a trail of excitement in its wake.
The restoration of the Kyosho Hurricane RC Boat was a success. Not only did it regain its structural integrity, but it also showcased its capabilities on the water. Whether you’re a seasoned RC boat enthusiast or a newcomer to the hobby, this restored model is sure to capture your attention and provide hours of enjoyment.
Restoration
The 1990 Kyosho Hurricane RC Boat had certainly seen better days. As I opened up the package, I couldn’t help but notice the debris that had accumulated from its previous owner. Undeterred, I meticulously cleared away the remnants of a forgotten adventure, ensuring that the boat was ready to navigate the waters once again.
A Farewell to Summer
It was the last day of summer, and I couldn’t think of a better way to bid farewell to the season than by taking my vintage RC boat out for a spin. I knew I had to be careful though, as this boat was a true gem from the past. So, I decided to take it easy and enjoy a smooth and leisurely ride. With a top speed of around 18 to 19 miles per hour, maybe even reaching 20, this boat still surpassed my expectations.
Preserving Its Originality
The sound of the engine hummed nostalgically, reminding me of the boat’s authentic origins. While I could have upgraded it with modern brushless motors for extra speed, I chose to keep it in its original state. It’s not every day that you come across a vintage boat that still runs like a dream. I wanted to savor the authenticity and relive the past with each turn of the propeller.
A Test of Maneuverability
I decided to put the boat through its paces, testing its maneuverability and responsiveness. With expert steering, the boat effortlessly turned on a dime, gliding gracefully through the water. The experience was nothing short of beautiful, encapsulating years of craftsmanship and engineering excellence.
Amped Up Performance
As I pushed the boat a little harder, I could feel the power surge through its veins. It was as if it had been given a new lease of life, driving just a tad faster than its stock speed. It was a buttery smooth ride, surpassing the limits set by its original specifications. And to think, I wasn’t even using an 8.4-volt battery pack – just a reliable 7.4-volt power source.
A Minor Setback
Unfortunately, amidst my excitement, a little bit of debris found its way into the boat’s path. Recognizing the need for a quick cleanup, I carefully steered back to shore to clear any potential obstructions. It was a small hiccup in an otherwise flawless adventure.
Final Moments on the Water
Returning to the water, the boat glided effortlessly once more as it took center stage. It was the star of the show, providing a spectacle for all those who had gathered to witness its prowess. We continued on, driving a bit more, cherishing these final moments before bringing it back to the safety of land.
Though my time on the water was coming to an end, the memories of this restoration journey and a final run in the nostalgic 1990 Kyosho Hurricane RC Boat would stay with me until the next summer beckoned for new adventures.
Restoration Process
The 1990 Kyosho Hurricane RC Boat, a true vintage gem, has undergone an intense restoration process to bring it back to life. With an amalgamation of passion and dedication, the boat was carefully disassembled, preserving its original components and ensuring minimal damage to its structure.
The first step of the restoration process involved a thorough cleaning of the boat’s hull, removing years of dirt and grime. Every nook and cranny was meticulously scrubbed to reveal the original vibrant colors that once adorned this magnificent watercraft.
Next, the mechanical components of the Kyosho Hurricane received undivided attention. Each part was methodically examined and repaired or replaced as necessary. The boat’s motor, which had sadly succumbed to the effects of time, was carefully dismantled and rejuvenated with precision. With its once silent roar now revitalized, the motor was ready to propel the Kyosho Hurricane with its full potential.
Furthermore, the electrical system underwent a thorough overhaul. Outdated wires were replaced, and connections were reestablished to ensure optimum performance. The intricacies of the boat’s electronics were delicately handled, encapsulating the essence of modern restoration techniques combined with a sense of nostalgia for the craftsmanship of the past.
The Ultimate Test: The Run
After countless hours of meticulous work, the Kyosho Hurricane was ready to make a grand splash on the water once again. The anticipation filled the air as the boat was gently placed onto the sparkling surface, ready to prove its mettle. The sheer power emanating from the motor was a testament to the thoroughness of the restoration process.
As the boat propelled forward, the water seemed to part effortlessly. Its sleek design cutting through the waves with unmatched grace and agility. The speed and stability exhibited by the Kyosho Hurricane were nothing short of awe-inspiring, reminding enthusiasts of its heyday dominance.
The remote control in the pilot’s hands allowed for precise maneuverability, ensuring every turn was executed flawlessly. The boat responded instantaneously, leaving spectators in sheer amazement. The nostalgia woven into the experience created a sense of wonder, bridging the gap between the past and the present.
Conclusion
In conclusion, the restoration and run of the 1990 Kyosho Hurricane RC Boat proved to be a challenging yet rewarding process. It is a testament to the enthusiasm and dedication of RC enthusiasts who take pleasure in reviving these vintage gems. The restored boat serves as a reminder of the legacy and innovation of the Kyosho brand, capturing the hearts of both old and new enthusiasts alike.
In the process of restoring and reviewing the 1990 Kyosho Hurricane RC Boat, the decals were successfully removed and the exterior was repaired and sealed. The attention to detail and careful craftsmanship ensured that the restoration would be long-lasting and reliable. With these improvements, the boat is now ready to be taken out for a run and enjoyed to its fullest. The dedication and effort put into this restoration project are evident, and the results speak for themselves.
The restoration and subsequent run of the 1990 Kyosho Hurricane RC Boat were an extraordinary treat for both the restorer and the thrilled observers. This vintage masterpiece, carefully brought back to life, reminded everyone of the glory days of RC boating. The attention to detail, from the restoration process to the mesmerizing run, emphasized the value of preserving our cherished pastimes and the joy they bring. The Kyosho Hurricane proves that even after three decades, its allure remains undeniable, solidifying its place as a timeless classic in the world of remote-controlled watercraft.